德国标准

标准

英文名称

中文名称

DVGW W543

Pressure Resistant Hosepipes And Compensators For Drinking Water Installation; Requirements And Testing

饮用水安装用耐压软管和补偿器；需求和测试

DIN EN 10352

Stainless steel plumbing fittings — Fittings with press ends for metallic tubes

不锈钢管道配件 - 用于金属管的带压端配件

DIN EN 1074-1

Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1: General requirements

供水阀门 - 适用性要求和适当的验证测试 - 第 1 部分：一般要求

DIN EN 1074-2

Valves for water supply -Fitness for purpose requirements and appropriate verification tests - Part 2: Isolating valves

供水阀门 - 适合用途要求和适当的验证测试 - 第 2 部分：隔离阀

DIN EN 1111

Sanitary Tapware - Thermostatic Mixing Valves (pn 10) - General Technical Specification

卫生水龙头 - 恒温混合阀 (pn 10) - 通用技术规范

DIN EN 1112

Sanitary Tapware - Shower Outlets for Sanitary Tapware for Water Supply Systems of Type 1 and Type 2 - General Technical Specification

卫生水龙头 - 1 型和 2 型供水系统用卫生水龙头的淋浴出口 - 通用技术规范

DIN EN 1113

Sanitary Tapware - Shower Hoses for Sanitary Tapware for Water Supply Systems of Type 1 and Type 2 - General Technical Specification

卫生水龙头 -  1 型和 2 型供水系统用卫生水龙头的淋浴软管 - 通用技术规范

DIN EN 1213

Building Valves - Copper Alloy Stopvalves For Potable Water Supply In Buildings - Tests And Requirements

建筑阀门 - 建筑饮用水用铜合金截止阀 - 测试和要求

DIN EN 12293

Plastics Piping Systems - Thermoplastics Pipes And Fittings For Hot And Cold Water - Test Method For The Resistance Of Mounted Assemblies To Temperature Cycling

塑料管道系统 - 热水和冷水用热塑性塑料管道和配件 - 已安装组件对温度循环的抵抗力的测试方法

DIN EN 12294

Plastics Piping Systems - Systems For Hot And Cold Water - Test Method For Leaktightness Under Vacuum

塑料管道系统-热水和冷水系统-真空下密封性的测试方法

DIN EN 12295

Plastics Piping Systems - Thermoplastics Pipes And Associated Fittings For Hot And Cold Water - Test Method For Resistance Of Joints To Pressure Cycling

塑料管道系统 - 热水和冷水用热塑性塑料管道和相关配件 - 接头耐压力循环的试验方法

DIN EN 1253-1

Gullies for buildings
Part 1: Trapped floor gullies with a depth water seal of at least 50 mm

建筑物的沟壑 第 1 部分：水封深度至少为 50 mm 的夹层排水沟

DIN EN 1253-2

Gullies for buildings
Part 2: Roof drains and floor gullies without trap

建筑物的沟壑 第 2 部分：无存水弯的屋顶排水沟和地沟

DIN EN 1254-1

Copper And Copper Alloys - Plumbing Fittings - Fittings With Ends For Capillary Soldering Or Capillary Brazing To Copper Tubes

铜和铜合金 - 管道配件 - 用于毛细管焊接或毛细管钎焊到铜管的端部配件

DIN EN 1254-2

Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes

铜和铜合金 - 管道配件 - 第 2 部分：与铜管一起使用的带压缩端的配件

DIN EN 1254-3

Copper And Copper Alloys - Plumbing Fittings - Fitting With Compression Ends For Use With Plastics Pipes

铜和铜合金 - 管道配件 - 带压缩端的配件，用于塑料管道

DIN EN 1254-4

Copper and copper alloys - Plumbing fittings - Part 4: Fittings with threaded end connections

铜和铜合金 - 管道配件 - 第 4 部分：带螺纹端接的配件

DIN EN 1254-5

Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes

铜和铜合金 - 管道配件 - 第 5 部分：用于毛细管钎焊到铜管的短端配件

DIN EN 1254-6

Copper and copper alloys - Plumbing fittings - Part 6: Fittings with push-fit ends

铜和铜合金 - 管道配件 - 第6部分：带推入配合端的配件

DIN EN 1254-8

Copper and copper alloys. Plumbing fittings. Fittings with press ends for use with plastics and multilayer pipes

铜及铜合金。水暖配件。用于塑料和多层管的带压端接头

DIN EN 1286

Sanitary Tapware - Low-pressure Mechanical Mixing Valves - General Technical Specification

卫生水龙头 - 低压机械混合阀 - 一般技术规范

DIN EN 1287

Sanitary Tapware - Low Pressure Thermostatic Mixing Valves - General Technical Specification

卫生水龙头 - 低压恒温混合阀 - 通用技术规范

DIN EN 13618

Flexible Hose Assemblies In Drinking Water Installations - Functional Requirements And Test Methods

饮用水装置中的柔性软管组件 - 功能要求和测试方法

DIN EN 13828

Building Valves - Manually Operated Copper Alloy And Stainless Steel Ball Valves For Potable Water Supply In Buildings -tests And Requirements

建筑阀门 - 用于建筑饮用水的手动操作铜合金和不锈钢球阀 - 测试和要求

DIN EN 15091

Sanitary Tapware - Electronic Opening And Closing Sanitary Tapware

卫生水龙头 - 电子开合卫生水龙头

DIN EN 16145

Sanitary Tapware - Extractable Outlets For Sink And Basin Mixers - General Technical Specification

卫生水龙头 - 水槽和面盆混合器的可抽出式出口 - 通用技术规范

DIN EN 16146

Sanitary Tapware - Extractable Shower Hoses For Sanitary Tapware For Supply Systems Type 1 And Type 2 - General Technical Specification

卫生水龙头 - 用于供应系统 1 型和 2 型的卫生水龙头的可抽出淋浴软管 - 通用技术规范

DIN EN 1717

Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow

水装置中的饮用水污染防护和防止回流污染装置的一般要求

DIN EN 200

Sanitary Tapware – Single taps and combination taps for water supply systems of type 1 and type 2 – General technical specification

卫生水龙头 - 1 型和 2 型供水系统的单水龙头和组合水龙头 - 通用技术规范

DIN EN 246

Sanitary Tapware - General Specifications For Flow Rate Regulators

卫生水龙头 - 流量调节器的一般规范

DIN EN 248

Sanitary Tapware - General Specification For Electrodeposited Coatings Of Ni-cr

卫生水龙头。镍铬电沉积涂层的通用规范

DIN EN 274-1

Waste Fittings For Sanitary Appliances - Part 1: Requirements

卫生器具的废物配件 - 第 1 部分：要求

DIN EN 274-2

Waste Fittings For Sanitary Appliances - Part 2: Test Methods

卫生器具的废弃配件 - 第 2 部分：测试方法

DIN EN 61770

Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets

连接到水管的电器 - 避免反虹吸和软管组故障

DIN EN 712

Thermoplastics piping systems - End-load bearing mechanical joints between pressure pipes and fittings - Test method for resistance to pull- out under constant longitudinal force

热塑性塑料管道系统。压力管和管件之间的端部承载机械接头。恒定纵向力下抗拔出性的试验方法

DIN EN 713

Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes – Test method for leaktightness under internal pressure of assemblies subjected to bending

塑料管道系统 - 管件和聚烯烃压力管之间的机械接头 - 弯曲组件在内部压力下的密封性试验方法

DIN EN 816

Sanitary tapware – Automatically shut-off valves PN10

卫生水龙头 – 自动关闭阀 PN10

DIN EN 817

Sanitary tapware – Mechanical mixing valves (PN10) – General technical specifications

卫生水龙头 – 机械混合阀 (PN10) – 一般技术规范

DIN EN 921

Plastics piping systems - Thermoplastics pipes - Determination of resistance to internal pressure at constant temperature

塑料管道系统 - 热塑性塑料管道 - 恒温下耐内压的测定

DIN EN 997

WC pans and WC suites with integral trap

WC 马桶和 WC 套件，带集成式存水弯