木材制品测试

    随着消费者对生活方式意识要求的提高，中国生产的轻工杂货类产品销量不断增加，产品日益广受欢迎的同时，与之相关的事故发生率不断增加，宁波欧标检测能够快速提供各款杂货类产品全面的测试和评估。我们能够按照您的要求并结合以下一些有检测标准对你的产品提供专业权威的安全项目评估及性能测试服务

    GB 1934.1:1991 木材吸水性测定方法

    Sample Size: 5 pcs of finished samples in 20mm×20mm×20mm
    Turnaround Time: at least 20 working days, depending on the actual water absorption of wooden material.
 

    ANSI A208.1 Particleboard 刨花板

    Clause Test Item
    3.2.1 Width and length
    3.2.2 Thickness
    3.2.3 Squareness
    3.2.4 Edge straightness
    3.3.1 Moisture content
    3.3.2 Density tolerance
    3.3.3 Linear expansion
    3.3.4 Thickness swell
    3.3.5 Durability of Exterior glue bonding system
    3.3.6 Internal bond
    3.3.7 Modulus of rupture and modulus of elasticity
    3.3.8 Hardness
    3.3.9 Face screw-holding capacity
    3.3.10 Edge screw-holding capacity
    3.3.11 Concentrated loading
    3.4 Formaldehyde provisions
    Total
 

    GB 9846 – 04 Plywood 夹板

    Part No. Title
    9876.1-04 Classification
    9876.2-04 Specification for dimensions and tolerances of plywood for general use
    9876.3-04 General specification for plywood for general use (added Formaldehyde Release test)
    9876.4-04 Specification for classification by appearance of plywood for general use
    9876.5-04 Inspection codes of plywood for general use
    9876.6-04 Marking, packaging, transportation and storage of plywood for general use
    9876.7-04 Cutting of test specimens
    9876.8-04 Determination of dimension of the test pieces
    Package Price:
 

    GB/T 4897-03 Particle Board 刨花板

    Clause Test Requirement
    4.1.2 Thickness
    4.1.3 Dimension (Width and Length)
    4.1.4 Straightness to Edge
    4.1.5 Squareness
    4.1.6 Warping
    4.1.7 Appearance
    5.2 Density Tolerance
    5.3 Moisture Content
    5.4 Thickness Swell to Water
    5.5 Internal Bond
    5.6 External Bond
    5.7 Modulus of Rupture
    5.8 Modulus of Elasticity
    5.9 Screw-holding Capacity (face/edge)
    5.1 Formaldehyde Release
    7 Marking, Packaging and Transportation
 

     GB/T 4897.3-03 Requirements for boards for interior fitments (including furniture) for use in dry conditions 在干燥状态下使用的家具及室内装修用板要求

    Clause Test Requirement
    5.2 Modulus of Rupture and Modulus of Elasticity
    5.3 Internal Bond
    5.4 External Bond
    5.5 Thickness Swell to Water
    5.6 Screw-holding Capacity (face/edge)
    5.7 Formaldehyde Release
    7 Marking, Packaging and Transportation
 

    GB/T 11718-99, Medium Density Fiberboard 中密度纤维板

    Clause Test Requirement
    5.2 Appearance
    5.3 Dimensional Tolerance
    5.4.1 Physical Performance
    5.4.2 Formaldehyde Release
    5.4.3 Additional Physical Performance
    7 Marking, Packaging and Transportation
    8.3 Density Tolerance
    8.4 Moisture Content
    8.5 Thickness Swell to Water
    8.6 Internal Bond
    8.7 Modulus of Rupture and Modulus of Elasticity
    8.8 Screw-holding Capacity (face/edge)
    8.1 Screw-holding Capacity (face/edge)
    8.11 Screw-holding Capacity (face/edge)
    8.12 Screw-holding Capacity (face/edge)
    8.13 Screw-holding Capacity (face/edge)
    8.14 Screw-holding Capacity (face/edge)
    8.15 Screw-holding Capacity (face/edge)
 

    BS EN 310:1993 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength 木板 -

    EN 204:2001木材制品和木材衍生制品连接用非结构粘合剂的分类

    Durability Class Test Requirement Price (RMB) Sample Size TAT (working days)
    D1 Serial 1 2200 500mL 10+7*
    D2 Serial 1+2 3000 500mL 14+7*
    D3 Serial 1+3+4 3600 500mL 12+7*
    D4 Serial 1+3+5 4200 500mL 18+7*

    Remark1: Test method refer to EN 205:2003 测试方法参考EN 205:2003